POCZTA.ONET.PL email server settings

Step 1: Start by selecting the Mail icon from your applications screen. Enter the email address and email password. Choose Manual Setup

Step 3: If you have choosen IMAP make sure to enter the below settings and click Next

Step 4: Enter the below outgoing SMTP Settings for POCZTA.ONET.PL and click Select Next

Step 5: Select Done. Congratulations! You are all done here and ready to use your email account on your Android phone. If you still have problems please visit this article.

Step 8: Select IMAP . Scroll down to Incoming Mail Server and enter all the relevant details, then do the same for Outgoing Mail Server, as in the screen below and then select Next.

Step 9: You may receive a prompt asking you to verify the incoming and outgoing servers – you can click continue for each or tap "Details" and then tap "Trust"

Congratulations! You are all done here and ready to use your email account on your iPhone. If you still have problems please visit this article.

Step 1: Launch Mail App. From the toolbar at the top, select Mail and then Add Account

Step 2: You can choose the automatic configuration of the email for the known used email accounts from the list and if you do not, you should choose Other Mail Account and setup your email manually

Enter your email account password

Step 5: Fill in the Incoming(IMAP) and Outgoing(SMTP) mail servers details. Then click Next

Account type : IMAP. Select IMAP from the dropdown
Incoming mail server IMAP: imap.poczta.onet.pl
Outgoing mail server SMTP : smtp.poczta.onet.pl
General server port details for incoming and outgoing:
- Outgoing (SMTP) Secure - Port: 465 for and Security Type: SSL/TLS (Accept all certificates)
- Outgoing (SMTP roaming server) Secure - Port: 587 and Security Type: SSL/TLS (Accept all certificates)
- Outgoing (SMTP) - Port: 25 and Security Type: None (Accept all certificates)
- Outgoing (SMTP roaming server) Insecure - Port: 587 and Security Type: None (Accept all certificates)

Step 6: Click OK

Congratulations! You are all done here and ready to use your email account on IncrediMail. If you still have problems please visit this article.

Manual Setup for POCZTA.ONET.PL email account on MailBird Lite

Step 1: Launch Mailbird Lite. Click on three parallel lines on the upper left corner and then choose Settings
Note: Please remember that Lite user can only have a maximum of 1 account. If you are setting up your email account for the first time, you should start from Step 4.

Step 2: Switch to Accounts tab and click Add button

Step 3: Enter your details on the Add account screen and then click Continue

Step 4: If Mailbird knows the IMAP or POP3 settings for your email account, then Mailbird will display this window. You need to enter your password first before you can Continue. However you are still able to edit your settings by clicking "Edit Server Settings".

Step 5: If Mailbird can’t find settings for your email account or if you choose to Edit Server Settings, then Mailbird will display this window. Enter your details on the screen and then click Continue. Note: If you use Secure SSL / TLS Settings, choose the corresponding Encryption in the current field.

Incoming Server type for POCZTA.ONET.PL, select IMAP
Incoming Server name for POCZTA.ONET.PL, enter imap.poczta.onet.pl
Username for POCZTA.ONET.PL - Enter your full email address
Password for POCZTA.ONET.PL - Enter your password
Outgoing Server name for POCZTA.ONET.PL, enter smtp.poczta.onet.pl
Enter your POCZTA.ONET.PL email address and password for username and password field.
General port details for incoming and outgoing server
- POP
  - Secure - Port: 995 and Security Type: SSL/TLS (Accept all certificates)
  - Insecure - Port: 110 and Security Type: None (Accept all certificates)
- IMAP
  - Secure - Port: 993and Security Type: SSL/TLS (Accept all certificates)
  - Insecure - Port: 143 and Security Type: None (Accept all certificates
- SMTP
  - Outgoing (SMTP) Secure - Port: 465 for and Security Type: SSL/TLS (Accept all certificates)
  - Outgoing (SMTP roaming server) Secure - Port: 587 and Security Type: SSL/TLS (Accept all certificates)
  - Outgoing (SMTP) - Port: 25 and Security Type: None (Accept all certificates)
  - Outgoing (SMTP roaming server) Insecure - Port: 587 and Security Type: None (Accept all certificates)

Step 6: Click Close and you are done!

Congratulations! You are all done here and ready to use your email account on Mailbird Lite. If you still have problems please visit this article.

Manual setup for POCZTA.ONET.PL email account on Opera Mail

Step 1: Launch Opera Mail.Select Email, then click Next

Step 2: Type in Name, POCZTA.ONET.PL email address and organization into the corresponding fields. Then click Next

Step 3: Type in your login name (your full POCZTA.ONET.PL email address) and password for your email account. Select the Email Account type (POP or IMAP). We choose IMAP. Click Next

Step 4: Type in Incoming Mail Server(IMAP) for POCZTA.ONET.PL as smtp.poczta.onet.pl and Outgoing server(SMTP) name as smtp.poczta.onet.pl. Note: If you use Secure TLS Settings, check the “Use secure connection (TLS)” box in both outgoing and Incoming mails. Click Finish

Step 5: Click on the Menu (Opera Mail) tab in Opera and select Mail Accounts

Step 6: Select the account you are configuring and click Edit

Step 7: Click on the Servers tab. For IMAP the port number should be 993. For Outgoing SMTP server the port number should be 465. Authentication should be set to AUTH LOGIN. Note : If you use Secure TLS Settings, check the “Secure connection (TLS)” box in both outgoing and Incoming mails. Below are the general port details.

POP
- Secure - Port: 995 and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 110 and Security Type: None (Accept all certificates)
IMAP
- Secure - Port: 993and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 143 and Security Type: None (Accept all certificates
SMTP
- Outgoing (SMTP) Secure - Port: 465 for and Security Type: SSL/TLS (Accept all certificates)
- Outgoing (SMTP roaming server) Secure - Port: 587 and Security Type: SSL/TLS (Accept all certificates)
- Outgoing (SMTP) - Port: 25 and Security Type: None (Accept all certificates)
- Outgoing (SMTP roaming server) Insecure - Port: 587 and Security Type: None (Accept all certificates)

Step 9: Click OK and Close to finish

Congratulations! You are all done here and ready to use your email account on Opera. If you still have problems please visit this article.

Setup Manaul Setup for POCZTA.ONET.PL email account on Thunderbird

Step 1: Launch Thunderbird. Click Local Folders > Email

Step 2: Click Skip this and use my existing email

Automatic setup for POCZTA.ONET.PL email account on Outlook 2007

Step 1: Launch Outlook 2007. Select Tools from the top menu bar, then Accounts Settings

Step 2: On the Account Settings screen, click New on the E-mail tab

Step 3: Select Microsoft Exchange, POP3, IMAP or HTTPand click Next

Step 4: On this screen enter your name, your POCZTA.ONET.PL email address and password and click Next

Step 5: Outlook will now automatically configure your account as an IMAP account with all the correct settings

Step 6: Finish > Close

Manual Setup for POCZTA.ONET.PL email account on Outlook 2007

Step 1: Launch Outlook 2007. Select Tools from the top menu bar, then Accounts Settings

Step 2: On the Account Settings screen, click New on the E-mail tab

Step 3: Select Microsoft Exchange, POP3, IMAP or HTTPand click Next

Step 4: Tick the Manually configure server settings or additional server types checkbox and click Next

Step 5: Select Internet E-mail and then click Next

Step 6: Enter all the relevant details (choose either POP or IMAP according to your needs) and then click More Settings

Step 7: Click on the Outgoing Server tab and ensure that the My outgoing server (SMTP) requires authentication checkbox is selected, as well as Use same settings as my incoming mail server

Step 9: Select the Advanced tab. Ensure that yourPOCZTA.ONET.PL settings are as below for your choice of either POP or IMAP.

POP port settings for POCZTA.ONET.PL

Incoming Port: 110, Outgoing Port: 465
General settings for POP
- Secure - Port: 995 and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 110 and Security Type: None (Accept all certificates)
Not ticked: This server requires an encrypted connection (SSL)
Use the following type of encrypted connection is None

IMAP port settings for POCZTA.ONET.PL

Incoming Port: 143, Outgoing Port: 465
- Secure - Port: 993and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 143 and Security Type: None (Accept all certificates
Not ticked: This server requires an encrypted connection (SSL)
Use the following type of encrypted connection is None

Note: If you use Secure SSL / TLS Settings, check the “This service requires a secure connection (SSL)” box in both outgoing and Incoming mails.

General SMTP port settings for POCZTA.ONET.PL

Outgoing (SMTP) Secure - Port: 465 for and Security Type: SSL/TLS (Accept all certificates)
Outgoing (SMTP roaming server) Secure - Port: 587 and Security Type: SSL/TLS (Accept all certificates)
Outgoing (SMTP) - Port: 25 and Security Type: None (Accept all certificates)
Outgoing (SMTP roaming server) Insecure - Port: 587 and Security Type: None (Accept all certificates)

Step 10: Click OK to save these settings

Step 11: Click Next and Finish

Congratulations! You are all done here and ready to use your email account on Outlook 2007. If you still have problems please visit this article.

Automatic Account setup for POCZTA.ONET.PL email account on Outlook 2010

Step 1: Launch Outlook 2010. Select File from the top menu bar and then Info and Account Settings

Manual Setup for POCZTA.ONET.PL email account on Outlook 2010

Step 1: Launch Outlook 2010. Select Tools from the top menu bar, then Accounts Settings

Step 2: On the Account Settings screen, click New on the E-mail tab

Step 3: In the Add New Account box choose Manual setup or additional server types > Next

Step 4: Select Internet E-mail and click Next

Step 5: Enter all the relevant details (Select POP or IMAP according to your preference) and then click More Settings

Step 6: Click on the Outgoing Server tab and ensure that the My outgoing server (SMTP) requires authentication checkbox is selected, as well as Use same settings as my incoming mail server

Step 7: Select the Advanced tabEnsure that yourPOCZTA.ONET.PL settings are as below for your choice of either POP or IMAP.

POP port settings for POCZTA.ONET.PL

Incoming Port: 110, Outgoing Port: 465
General settings for POP
- Secure - Port: 995 and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 110 and Security Type: None (Accept all certificates)
Not ticked: This server requires an encrypted connection (SSL)
Use the following type of encrypted connection is None

IMAP port settings for POCZTA.ONET.PL

Incoming Port: 143, Outgoing Port: 465
- Secure - Port: 993and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 143 and Security Type: None (Accept all certificates
Not ticked: This server requires an encrypted connection (SSL)
Use the following type of encrypted connection is None

Note: If you use Secure SSL / TLS Settings, check the “This service requires a secure connection (SSL)” box in both outgoing and Incoming mails.

General SMTP port settings for POCZTA.ONET.PL

Outgoing (SMTP) Secure - Port: 465 for and Security Type: SSL/TLS (Accept all certificates)
Outgoing (SMTP roaming server) Secure - Port: 587 and Security Type: SSL/TLS (Accept all certificates)
Outgoing (SMTP) - Port: 25 and Security Type: None (Accept all certificates)
Outgoing (SMTP roaming server) Insecure - Port: 587 and Security Type: None (Accept all certificates)

Step 8: Click OK to save these settings

Step 9: Click Next and Finish

Congratulations! You are all done here and ready to use your email account on Outlook 2010. If you still have problems please visit this article.

Automatic Account setup for POCZTA.ONET.PL email account on Outlook 2013

Step 1: Launch Outlook 2013. Select File on the top left menu bar. Select Info and Account Settings

Step 2: Enter your details on the Auto Account Set-up screen > Next

Step 3: The following warning messages may appear > Allow and Choose > Yes

Step 4: Outlook will now automatically configure your account as an IMAP account with all the correct settings

Step 6: Finish > Close

Manual Account setup for POCZTA.ONET.PL email account on Outlook 2013

Step 1: Launch Outlook. Select File on the top left menu bar. Select Info and Account Settings

Step 2: Choose Manual Setup or additional server types > Next

Step 3: Select POP or IMAP > Next

Step 4: . Enter all the relevant details (Select POP or IMAP according to your preference) and then click More Settings

Step 5: Click on the Outgoing Server tab and ensure that the My outgoing server (SMTP) requires authentication checkbox is selected, as well as Use same settings as my incoming mail server

Step 6: Select the Advanced tab

Step 7: Ensure that your settings are as below for your choice of either POP or IMAP:

POP port settings for POCZTA.ONET.PL

Incoming Port: 110, Outgoing Port: 465
General settings for POP
- Secure - Port: 995 and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 110 and Security Type: None (Accept all certificates)
Not ticked: This server requires an encrypted connection (SSL)
Use the following type of encrypted connection is None

IMAP port settings for POCZTA.ONET.PL

Incoming Port: 143, Outgoing Port: 465
- Secure - Port: 993and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 143 and Security Type: None (Accept all certificates
Not ticked: This server requires an encrypted connection (SSL)
Use the following type of encrypted connection is None

Note: If you use Secure SSL / TLS Settings, check the “This service requires a secure connection (SSL)” box in both outgoing and Incoming mails.

General SMTP port settings for POCZTA.ONET.PL

Outgoing (SMTP) Secure - Port: 465 for and Security Type: SSL/TLS (Accept all certificates)
Outgoing (SMTP roaming server) Secure - Port: 587 and Security Type: SSL/TLS (Accept all certificates)
Outgoing (SMTP) - Port: 25 and Security Type: None (Accept all certificates)
Outgoing (SMTP roaming server) Insecure - Port: 587 and Security Type: None (Accept all certificates)

Step 8: Click OK to save these settings

Step 9: Click Next and Finish

Congratulations! You are all done here and ready to use your email account on Outlook 2013. If you still have problems please visit this article.

Automatic Account setup for POCZTA.ONET.PL email account on Outlook 2016

Step 1: Launch Outlook. Select File on the top left menu bar. Select Info and Account Settings

Step 2: Enter your details on the Auto Account Set-up screen > Next

Step 3: Outlook will now automatically configure your account as an IMAP account with all the correct settings

Step 4: Finish > Close

Manual Account setup for POCZTA.ONET.PL email account on Outlook 2016 - Method 1

Step 1: Launch Outlook. Select File on the top left menu bar. Select Info and Account Settings

Step 2: Choose Manual Setup or additional server types > Next

Step 3: Select POP or IMAP > Next

Step 5: Enter all the relevant details (Select POP or IMAP according to your preference) and then click More Settings

Step 7: . Select the Advanced tab. Ensure that your settings are as below for your choice of either POP or IMAP:

POP port settings for POCZTA.ONET.PL

Incoming Port(POP3): 110, Outgoing Port(SMTP): 465 or 587
General settings for POP
- Secure - Port: 995 and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 110 and Security Type: None (Accept all certificates)
Not ticked: This server requires an encrypted connection (SSL)
Use the following type of encrypted connection is None

IMAP port settings for POCZTA.ONET.PL

Incoming Port: 143, Outgoing Port: 465
- Secure - Port: 993and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 143 and Security Type: None (Accept all certificates
Not ticked: This server requires an encrypted connection (SSL)
Use the following type of encrypted connection is None

Note: If you use Secure SSL / TLS Settings, check the “This service requires a secure connection (SSL)” box in both outgoing and Incoming mails.

General SMTP port settings for POCZTA.ONET.PL

Outgoing (SMTP) Secure - Port: 465 for and Security Type: SSL/TLS (Accept all certificates)
Outgoing (SMTP roaming server) Secure - Port: 587 and Security Type: SSL/TLS (Accept all certificates)
Outgoing (SMTP) - Port: 25 and Security Type: None (Accept all certificates)
Outgoing (SMTP roaming server) Insecure - Port: 587 and Security Type: None (Accept all certificates)

Step 8: Click OK to save these settings

Step 9: Click Next and Finish

Manual Account setup for POCZTA.ONET.PL email account on Outlook 2016 - Method 2

Step 1: Launch Outlook. Select File on the top left menu bar. Select Info and Account Settings. Select the Add Account button in the middle of the screen, then Account Settings

Step 2: . Insert your email address Select Advanced options, then select Let me setup my account manually > Connect

Step 3: This screen will display the various account options – select IMAP (or POP)>

Step 4: Server Settings: Please make sure you enter the below incoming and outgoing server details

Incoming mail: You can choose to go for POP or IMAP. Below are the settings.

POP port settings for POCZTA.ONET.PL

Incoming Port: 110, Outgoing Port: 465
General settings for POP
- Secure - Port: 995 and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 110 and Security Type: None (Accept all certificates)
Not ticked: This server requires an encrypted connection (SSL)
Use the following type of encrypted connection is None

IMAP port settings for POCZTA.ONET.PL

Incoming Port: 143, Outgoing Port: 465
- Secure - Port: 993and Security Type: SSL/TLS (Accept all certificates)
- Insecure - Port: 143 and Security Type: None (Accept all certificates
Not ticked: This server requires an encrypted connection (SSL)
Use the following type of encrypted connection is None

Note: If you use Secure SSL / TLS Settings, check the “This service requires a secure connection (SSL)” box in both outgoing and Incoming mails.

General SMTP port settings for POCZTA.ONET.PL

Outgoing (SMTP) Secure - Port: 465 for and Security Type: SSL/TLS (Accept all certificates)
Outgoing (SMTP roaming server) Secure - Port: 587 and Security Type: SSL/TLS (Accept all certificates)
Outgoing (SMTP) - Port: 25 and Security Type: None (Accept all certificates)
Outgoing (SMTP roaming server) Insecure - Port: 587 and Security Type: None (Accept all certificates)

Step 6: You will now be prompted for the password and then click OK

Congratulations! You are all done here and ready to use your email account on Outlook 2016. If you still have problems please visit this article.

POCZTA.ONET.PL email server settings - IMAP and SMTP (2024)

FAQs

How do I find my email servers IMAP and SMTP information? ›

Find your Exchange mailbox server settings

In Outlook Web App, on the toolbar, select Settings. > Mail > POP and IMAP. The POP3, IMAP4, and SMTP server name and other settings you may need to enter are listed on the POP and IMAP settings page.

Read The Full Story ›

How do I find my IMAP account settings? ›

Open your provider's “Options” or “Settings” page and look for options that specify "IMAP," "forwarding" or "mail servers." For example, to enable IMAP in Gmail, go to "Settings," select the "Forwarding and POP/IMAP" tab, scroll down to the IMAP Access section and select “Enable IMAP."

Discover More ›

What are the IMAP settings for mail com? ›

Email Settings for Mail.com

Server: imap.mail.com.
Port: 993.
Security: SSL/TLS.
Username: Your full email address.
Password: Your password.

How do I find my email SMTP server address? ›

You can generally find your SMTP email server address in the account or settings section of your mail client. Using a store and forward process, SMTP works with the mail transfer agent to move your email across networks to the right computer and email inbox.

Explore More ›

Where can I get my SMTP email server address user and password? ›

How to Find the SMTP Server for Gmail

Gmail SMTP server address: smtp.gmail.com.
Gmail SMTP name: Your full name.
Gmail SMTP username: Your full Gmail address (e.g. you@gmail.com)
Gmail SMTP password: The password that you use to log in to Gmail.
Gmail SMTP port (TLS): 587.
Gmail SMTP port (SSL): 465.

Nov 29, 2022

Get More Info ›

Is my IMAP password the same as my email password? ›

Hi EdMasilunas, Glad to help you here. Your IMAP password is the password to an email account that is configured to use IMAP. If you have forgotten it you can reset it using whatever method your email provider offers for resetting it.

Get More Info Here ›

Is gmail an IMAP account? ›

Gmail, Google's internet-based email service, runs on the Internet Message Access Protocol (IMAP) system.

See Details ›

Are IMAP and SMTP passwords the same? ›

The SMTP and IMAP servers are separate as far as your mail client is concerned, and that's true for nearly all clients I've tried so far. (Well, some do have an option to "use the same credentials as IMAP", e.g. Outlook does.) Although the two servers can share authentication information, and nearly always do.

Read On ›

What should I put for outgoing mail server? ›

The default port of an outgoing mail server is 25: since it “speak” the SMTP protocol, it is also known as the more typical SMTP port.

Read On ›

What is IMAP server number? ›

An IMAP server typically listens on port number 143. IMAP over SSL/TLS (IMAPS) is assigned the port number 993. Virtually all modern e-mail clients and servers support IMAP, which along with the earlier POP3 (Post Office Protocol) are the two most prevalent standard protocols for email retrieval.

Keep Reading ›

What is my SMTP password? ›

Gmail SMTP username: Your full Gmail address, such as youremail@gmail.com. Gmail SMTP password: Your Gmail password.

View Details ›

Is Gmail a SMTP or IMAP? ›

Step 2: Change SMTP & other settings in your email client

Incoming Mail (IMAP) Server	imap.gmail.com Requires SSL: Yes Port: 993
Outgoing Mail (SMTP) Server	smtp.gmail.com Requires SSL: Yes Requires TLS: Yes (if available) Requires Authentication: Yes Port for SSL: 465 Port for TLS/STARTTLS: 587

3 more rows

Discover More Details ›

What is SMTP username and password? ›

SMTP Username: <email address> SMTP Password: [password to authenticate above email address]

Get More Info Here ›

Should I use IMAP or SMTP? ›

As we've discussed throughout this article, IMAP is for receiving email while SMTP is for sending email. So, if you're looking to send email, then you're better off using SMTP over IMAP.

What port number is SMTP? ›

Port 587 is the default port for SMTP submission on the modern web.

Explore More ›

What is my IMAP password? ›

Depending on your e-mail provider, this is usually either your full e-mail address or the part of your e-mail address before the "@" symbol. This is the password for your account.

Explore More ›

Does SMTP server need password? ›

With the new protocols in place, an authentication mechanism (like a password) is necessary to log in to an email service provider's SMTP server. This means that only verified users can send messages via that server – providing a basic level of security against the sending of unsolicited spam and phishing emails.

What is your IMAP account? ›

IMAP allows you to access your email wherever you are, from any device. When you read an email message using IMAP, you aren't actually downloading or storing it on your computer; instead, you're reading it from the email service.

Know More ›

What is the correct SMTP for Gmail? ›

The fully qualified domain name of the SMTP service is smtp.gmail.com. Configuration options include: Port 25, 465, or 587.

Show Me More ›

What port number does Gmail use for SMTP? ›

The outgoing SMTP server, smtp.gmail.com , supports TLS. If your client begins with plain text, before issuing the STARTTLS command, use port 465 (for SSL), or port 587 (for TLS).

What is the outgoing SMTP server for Gmail? ›

What are the Gmail SMTP server settings?

Outgoing Mail (SMTP) Server: smtp.gmail.com.
Use Authentication: Yes.
Use Secure Connection: Yes (TLS or SSL depending on your mail client/website SMTP plugin)
Username: your Gmail address (e.g., user@gmail.com)
Password: your Gmail password.

More items...

Show Me More ›

Do hackers use IMAP? ›

Legacy email protocols like IMAP are prime targets for hackers.

Learn More Now ›

How do I connect to an IMAP server? ›

In the Advanced Settings menu, input the incoming/outgoing mail server information, username and password, then tap Sign In. To enter additional port information, add a colon and the port number after your hostname (example: "imap.server.com:993").

Keep Reading ›

Does IMAP sync all emails? ›

If you're dealing with email on multiple devices—say a mobile device and a desktop computer—IMAP automatically keeps everything in sync. Note, however, that once messages are viewed they are stored on your local machine as a cache to improve performance on subsequent loads.

What is the outgoing mail server for 1and1? ›

smtp.1and1.com

Get More Info ›

How do I set up outgoing mail server SMTP? ›

Windows® Mail (PC)

From the Tools menu, select Accounts.
Under Mail highlight your E-mail account and click Properties.
Click the Servers tab and make sure that "My outgoing server (SMTP) requires authentication" is checked.
Click the Advanced tab, change the outgoing server port: 465 or 587 for SSL.
Click OK.

Discover More Details ›

Why is SMTP not sending emails? ›

Check whether there is network access from CSO to the SMTP server. Check whether the firewall is blocking SMTP traffic to SMTP server or whether the ports are blocked. If the server settings and authentication settings are correct, check whether the firewall is blocking port 587 and 465 and SMTP traffic.

Know More ›

What is the default port for IMAP SMTP? ›

Port 143 – Default IMAP port. Also used for TLS. Port 993 – IMAP port used for SSL.

Tell Me More ›

Do hackers use SMTP? ›

Aside from sending phishing and spam emails, an SMTP hack can also give way to denial-of-service (DoS) attacks. Hackers can use your SMTP server to send a massive number of emails to other servers, effectively drowning the targets until they crash.

Read On ›

How do I activate my SMTP account? ›

Open the Microsoft 365 admin center and go to Users > Active users. Select the user, and in the flyout that appears, click Mail. In the Email apps section, click Manage email apps. Verify the Authenticated SMTP setting: unchecked = disabled, checked = enabled.

Discover More ›

Which protocol is best for receiving email? ›

POP3 is the standard for receiving emails. Its flow is also simple: After you send a transactional email, SMTP does the sending part. POP3 reaches the mail server, grabs the message and forwards it to a recipient inbox.

What is my IMAP account password? ›

Depending on your e-mail provider, this is usually either your full e-mail address or the part of your e-mail address before the "@" symbol. This is the password for your account.

How do I find my SMTP username and password for Outlook? ›

Outlook Smtp Settings

Server Address: smtp-mail.outlook.com.
Username: Your Outlook Email Address (e.g. example@outlook.com)
Password: Your Outlook Password.
Port Number: 587 (With TLS)
Alternative Port Number: 25 (Without TLS/SSL)
Sending Limits: 300 Emails a day or 100 recepients a day.

Show Me More ›

How do I find IMAP and SMTP on my iPhone? ›

iPhone (Apple mail)

Select the email account that is your old email account.
Under IMAP, select Account.
This will display your incoming (IMAP) and outgoing (SMTP) mail server information to use as your Source Server information.

Know More ›

Why is my email asking for IMAP password? ›

Tell Me More ›

What port number is IMAP? ›

If you enable the IMAP service, you can specify the port number that the server is to use for IMAP connections. The default is 143.

How do I know if I have an IMAP account? ›

You can find out whether your email is POP or IMAP by checking your email client. Open your email account settings and it will usually indicate if you're set up for POP or IMAP.

Learn More Now ›

How to solve Outlook cannot connect to your outgoing SMTP email server? ›

Possible Solution:

Please verify that you have enabled "My SMTP Requires Authentication" in Incoming mail server Outlook settings.
If this does not work out, then try to disable the firewall of your local machine from where you are trying to send out an email.

More items...

Keep Reading ›

What is the port and server for Outlook SMTP? ›

When you need to add your Outlook.com account (or Microsoft account / Hotmail account / Live.com account / MSN account) to another mail app (like Gmail), you'll need to use the following SMTP settings: SMTP Server Name: smtp.office365.com. SMTP Port Number: 587.

Keep Reading ›

What is SMTP server port for iPhone? ›

Server Port: the default port is 25, but some ISPs block it due to the increasing amount of spam; so you can set another one.

How do I enable SMTP on my iPhone? ›

Go to your phone's SETTINGS, then scroll down and tap on MAIL. Tap on ACCOUNTS and select your CWS-hosted email account. Tap on that ACCOUNT under the IMAP section. Under the Incoming Mail Server section, change the Host Name field to mail.yourdomain.com, then tap on SMTP under Outgoing Mail Server.

Learn More ›

What do I put for IMAP server on iPhone? ›

Ensure IMAP is selected. Enter your incoming mail server information: Hostname is mail.yourdomain.com.
...
SET UP IPHONE / IPAD IMAP FOR EMAIL

Hostname is smtp.yourdomain.com.
Username is your full email address.
Password is the same password used to access webmail.

Jul 29, 2022

How do I enable IMAP access to my email? ›

Step 1: Check that IMAP is turned on

On your computer, open Gmail.
In the top right, click Settings. See all settings.
Click the Forwarding and POP/IMAP tab.
In the "IMAP access" section, select Enable IMAP.
Click Save Changes.

Discover More ›

Why does my email keep saying my password is incorrect? ›

Sometimes you'll see a "Password incorrect" error when you sign in to Google with a third-party app, like Apple's Mail app, Mozilla Thunderbird, or Microsoft Outlook. If you've entered your password correctly but you're still getting the error, you might need to update the app or use a more secure app.

Read The Full Story ›

POCZTA.ONET.PL email server settings - IMAP and SMTP (2024)

Manual Setup for POCZTA.ONET.PL email account on MailBird Lite

Manual setup for POCZTA.ONET.PL email account on Opera Mail

Setup Manaul Setup for POCZTA.ONET.PL email account on Thunderbird

Automatic setup for POCZTA.ONET.PL email account on Outlook 2007

Manual Setup for POCZTA.ONET.PL email account on Outlook 2007

Automatic Account setup for POCZTA.ONET.PL email account on Outlook 2010

Manual Setup for POCZTA.ONET.PL email account on Outlook 2010

Automatic Account setup for POCZTA.ONET.PL email account on Outlook 2013

Manual Account setup for POCZTA.ONET.PL email account on Outlook 2013

Automatic Account setup for POCZTA.ONET.PL email account on Outlook 2016

Manual Account setup for POCZTA.ONET.PL email account on Outlook 2016 - Method 1

Manual Account setup for POCZTA.ONET.PL email account on Outlook 2016 - Method 2

FAQs

How do I find my email servers IMAP and SMTP information? ›

What is my SMTP password? ›

What is your IMAP account? ›

What is the default port for IMAP SMTP? ›

How to solve Outlook cannot connect to your outgoing SMTP email server? ›